The STYLUS PROFIL sander is intended for sanding and polishing
edges of granite and marble slabs 10-120 mm thick.
With straight sanding, high-quality and fast polishing is possible up to
80mm thick, and up to 150mm for the rounded one.
In the case of straight grinding, it is possible to adjust the inclination angle from
0° to 180°, and for rounded grinding it is possible to adjust
radius of rounding from 5 – 80 mm. For precise adjustment of heavier ones
of stone slabs up to the limiter (mass up to 1000 kg) serves
lift-turn table equipped with an air cylinder for lifting
plate above the table surface.
It is possible to process the edges straight, rounded or in a combination of the following shapes:
| TECHNICAL DATA | |
|---|---|
| maximum grinding length | 3000 mm |
| minimum width of stone slab | 180(130) mm |
| the thickness of the stone | 10-150 mm |
| grinding radius | 5-80 mm |
| longitudinal feed speed (continuous speed control) | 2-20 m/min |
| the length of the table | 4000 mm |
| table width | 1200 mm |
| load capacity of the rotary lifting table | 1000 kg |
| tool diameter | 100, 130 mm |
| installed power of the machine | 2.4 Kw |
| electrical connection | 3 x 380 V, 50 Hz, 16 A |
| connection to cooling water | 3 bar, 6 l/min |
| compressed air connection | 7 bar |
| mass of the machine | approx. 2500 kg |
| required area of the workspace | min 5.5 x 3.5 m |
Whether you are in the planning stages or already have concrete ideas, we are here to help you turn your ideas into reality.
Contact us