With flat sanding, high-quality and fast polishing is possible up to a thickness of 80 mm, and with rounded sanding up to 150 mm.
In the case of straight sanding, it is possible to set the angle of inclination from 0° to 180°, and in the case of rounded sanding, it is possible to set the radius of rounding from 5 – 80 mm. For precise adjustment of heavier stone slabs up to the stop (mass up to 1000 kg), a lifting-turntable equipped with an air cylinder is used to lift the slabs above the surface of the table.
| TECHNICAL DATA | ||
|---|---|---|
| KD 500/4.5 | KD 1000/4.5 | |
| Capacity | 500 kg | 1000 kg |
| Arm length | 4.5 m | 4.5 m |
| Load access | (from the middle of the column) 1.4 to 4.3 m | 1.4 to 4.3 m |
| Total height * | 3.6 m | 3.6 m |
| Height to the bottom edge of the console * | 3.3 m | 3.25 m |
Remark:
* ) according to the order, the height can be higher or lower than the one specified
Whether you are in the planning stages or already have concrete ideas, we are here to help you turn your ideas into reality.
Contact us
