Bridge circular saw for cutting granite VECTOR 1000
Bridge circular saw for cutting granite VECTOR 1000 is used for straight cutting of stone slabs up to 220 mm thick and cut lengths up to 3500 mm.
| TECHNICAL DATA | |
|---|---|
| Bridge range | 5000 mm / or on demand |
| Forth and back travel | 3500 mm / or on demand |
| Cutting length | 3500 mm / or on demand |
| Rotary table dimensions (rotating degree360°) | 3500 x 2000 mm |
| Circular saw diameter | 450 – 1000 mm |
| Main engine power | 14.6 kW (100%) / 17.6 kW (60%) |
| Main engine rpm | 500 – 1200 / min |
| Motor shaft diameter | 60 mm |
| Manual adjustment of the cutting angle | 0° - 45° |
| Graded depth of the cut | 10° - 100 mm |
| Visualization of the direction of cutting | laser beam |
| Adjustable cutting speed | 0,2 6 m / min |
| Adjustable speed of forth and back travel | 0 6 m / min |
| Blade vertical movement speed (engine) | 0 0.6 m / min |
| Reading the bridge travel (cut width) | digital display |
| Reading the space between the table and the saw | digital display |
| Control (24VDC) | Numerical, using the hanging keyboard |
| Water supply | 20 l / min, 3 bar |
| Installed power | 19 kW |
| Electrical connection | 3 x 380 V, 50 Hz, 50 A |
The machine is standard equipped with numerical control (NC) and a laser for visualization of cutting direction Cutting methods:
- Manual (managing the entire movement of the machine using 2 joysticks )
- In multiple passes with automatic operation
- Automatic cutting of sills with selected width (programming up to 50 sills
- Contour cutting (10 programs with 200 individual cuts )
Upon completion of cutting the blade engine, and the water feed are automatically stopped, and the blade returns to the starting position.
