Granite grinder STYLUS PROFILE 2
In case of flat grinding, quality high speed polishing is possible up to 80mm thickness and with curved grinding to 150mm. In case of flat grinding it is possible to adjust the tilt angle from 0° to 180°, and with curved grinding it is possible to adjust radius curves from 5 – 80 mm. For precise positioning of heavy stone slabs to the delimiter (up to 1000 kg mass) a lift rotary table equipped with an air cylinder is used to raise the board above the table surface.
It is possible to process the edges straight, curved or combining these shapes:
| TECHNICAL DATA | |
|---|---|
| Maximum length of grinding | 3000 mm |
| Minimum width of paving stones | 180 (130) mm |
| Stone thickness | 10 – 150 mm |
| Grinding radius | 5 – 80 mm |
| Speed of longitudinal feed (continuous speed control) | 2 – 20 m / min |
| Table length | 4700 mm |
| Table width | 1200 mm |
| Payload of lift rotary table | 1000 kg |
| Tool (grinding wheel) diameter | 1100, 130 mm |
| Installed power of the machine | 2,4 kW |
| Electrical connection | 3 x 380 V, 50 Hz, 16 A |
| Access to water for cooling | 3 bar, 6 l / min |
| Compressed air connection | 7 bar |
| Weight | Approx. 2500 kg |
| Required size of working space | Min 6,2 m x 3.5 m |
