Grinding „KOMET alpha“ is used for planning and grinding – polishing granite and marble slabs. Due to the small size and simple design it is primarily suited for reparing, finishing headstones, polishing shaped stone blocks and drilling with diamond crowns. Grinder is equipped with a rubber flange connection (M20 – snail ) for grinders up to Ø 150 mm and joint head oft he grinding wheel Ø 200,Ø 250 (the glue). Basic equipment is to be installed on the wall and carrying steel pole and base for paving stones can be delivered upon request
TECHNICAL DATA | |
---|---|
Action radius of grinding wheel spindle | Max 2000 mm, min 550 mm |
Vertical travel of the machine along the guides | 500 mm |
Vertical stroke of quill of engine | 80 mm |
Speed of main engine (grinding wheel) | 500 – 1350 /min |
Main engine (at 920 / min and 60 % of plants) | 3,5 kW |
Engine power for the vertical stroke | 0,37 kW |
Regulation of force pressing the grinding wheel | Preasure regulator on the keyboard |
Installed capacity of the machine | 4 kW |
Electrical connection | 3 x 380 V, 50 Hz, 16 A |
Connection to the cooling water | 3 bar, 6 l / min |
Cooling water intake | Centrally trough the main engine |
Compressed air connection | 7 bar |
Weight | 330 kg (basic version) |
Grinding wheel diameter | Ø 150 (connection „the snail“) Ø 200, Ø 250 or glued (available in Drop Head) |