Cantilever crane

Fotografije uz članak 1

With flat sanding  good and fast quality polishing can be achieved for  tickness of 80 mm, with a rounded to 150 mm, in the case of flat grinding it is possible to adjust the tilt angle from 0° to 180° and with curved sanding it is possible to adjust the radius curves  from5 – 80 mm. For precise positioning of heavy stone slab sup to the stop (mass up to the 1000 kg) bi-rotary table  is used  which is equipped with an air cylinder to raise the board above the table surface.

TECHNICAL DATA
  KD 500/4.5 KD 1000/4.5
Capacity 500 kg 1000 kg
Boom length 4.5 m 4.5 m
The retrival of cargo 1.4 to 4.3 m 1.4 to 4.3 m
Overal height 3.6 m 3.6 m
Height to the bottom edge of the console 3.3 m 3.25 m

Note :

  • According  to the customer's order height can be bigger or smaller than specified
  • With the crane,we deliver the core bolts which must be put in appropriate concrete foundation
  • According to customer's request, we provide the appropriate electric or manual winch with  corresponding trolley

Kontakt

Kalmana Mesarića 26,
40323 PRELOG

tel: +385 (40) 645-344 +385 (40) 645-324
Fax:+385 40 645-408 +385 40 646-105

e-mail: info@komet.hr

* - obavezna polja